
Place the decal on a flat surface |

Turn over the decal so the backing paper if facing you |

Carefully peel back the corner of the backing paper at a sharp angle making sure the decal stays on the application tape |

Closeup of the picture above |

Making sure you hold the application tape down firmly with one hand start to peel the backing paper back by bending it back on itself |

Continue the process slowly making sure you hold the decal firmly in place with one hand |

Keep peeling back the backing paper making sure you hold the decal firmly in place with one hand |

Whilst holding the application tape with one hand continue peeling back the paper at a sharp angle or rolling it back if you find it easier. |

Continue peeling back the paper at a sharp angle or rolling it back if you find it easier but do not let go of the application tape |

Decal peeled now go back to the fitting page click here |